FERTIGATION CONTROLLER, FERTI 8.000

programador de fertirrigacion Ferti 8000

FERTIGATION CONTROLLER, FERTI 8.000

FERTI 8000 is the most competitive agricultural irrigation programmer for fertigation and hydroponics on the market.

¡Install FERTI 8000 and forget about problems!

The most complete and easy to use agricultural irrigation controller. Multiple functions for irrigation control in the most intuitive way. Manage it also from your mobile, PC or tablet with the Maher App.
Robust and durable. Proven by the low rate of incidents recorded.
Fertilisation with pH and electrical conductivity control. Maximum precision for improved crop yields. Also allows fertilisation by time.
Very versatile. Ideal option for any type of crop, both in soil and hydroponics; also for small or large farms. Hydroponic crops, horticulture, strawberries, bananas, fruit trees, vineyards, olive groves, etc.
Connection to sensors. Allows connection without the need for a datalogger.

NEW: It is possible to connect MAHER SMART, FERTI 8000 and CICLÓN irrigation controllers with METOS weather stations via MAHER App.

Your curiosity deserves answers. Send us a message and we will provide you with the information you need.

I WANT INFORMATION

What does the FERTI 8000 agricultural irrigation controller control?

Irrigation
Pumping
Agitation Fertilizers
Fertilisation with pH, EC (electrical conductivity), proportional, time, volume and fixed control.
Filter Cleaning
Mixture of 2 waters (optional)
Remote operation via GPRS (optional)
Remote activation of valves, motors, etc. (optional)
Diesel starter (optional)
2 Irrigation pumps
1 Master valve
1 Safety valve
1 Agitator
1 Special treatment
4 Fertilisers (extendable up to 8)
1 Acid
1 General fertiliser pump
8 Filters

Recording historical data

Irrigation carried out: Nº of program, time and type of start, anomalies detected, volume, etc…
Valve histories: Nº of irrigations per valve, total irrigation time, pre-watering and post-watering…
Cumulative records since last reset: Total irrigation times and volumes (pre-irrigation and post irrigation), total fertiliser time, total treatment time.

Manual actions

Start an irrigation program
Stop irrigation
Change controller status: Stop – active

Digital inputs

10 Digital inputs, voltage-free, fully configurable as pulse counters or detectors of different events and anomalies

Analogue inputs

6 Analogue inputs for connecting sensors to the equipment. These inputs are configurable both in signal range and input voltage range. We can use sensors with 4-20mA or 0-5V= output. The function of each of these inputs is programmable.

Models

FERTI 8000 comes in different versions. You can find FERTI 8000 in two power supply versions. In addition, the number of outputs can be configured as required. From 16 outputs, expandable by 8 in 8, up to 96 outputs.

Number of outlets: 16, 24, 32, 40… up to 96
Supply voltage and outputs:
- 220VAC power supply and 24VAC outputs
- 12VDC power supply and 12VDC / 12VDC latch 2-wire outputs (configurable on the device)
Version: Controller built-in, in cabinet and control box.

Irrigation control equipment made to order. In cabinet or control box. format, with methacrylate synoptic, in which the electrical part can be included. And, in addition, fertigation equipment complete, including hydraulics.

Irrigation Scheduling

Ferti 8000 has 20 independent irrigation programs. The program data can be changed during execution and will become effective without irrigation having to be stopped..

10 valves per program to be irrigated independently or grouped together
Irrigation by time or volume
Delayed start/stop of pumps and valve closure to prevent water hammer
3 irrigation shutdown conditions by the status of a digital input or remote unit or by the reading of a sensor connected to the controller’s analogue inputs.

Type of irrigation start:

- Fixed hours (up to 3 different hours per day)
- Sequential (time of irrigation and pause between irrigations)
- Demand (up to 5 demand entries)
- Analogue input (tensiometer, soil moisture sensor…)
- Accumulated solar radiation
- After another program (starts at the end of another watering program)

Fertilisation

Injection of 4 fertilisers (extendable up to 8)
The pH control of irrigation water can be carried out with acid or base.
Injection of inputs or special treatments
Fertiliser agitation
Interruption of fertilisation due to recorded anomalies
Types of fertilisation:
- pH and EC control
- Differential pH and EC control
- Differential pH and EC control, mixing two waters with different ECs
- pH control and fertilisation by time
- By time

Options

Software Options:

Maher App. With a GPRS modem, the controller can be operated from an electronic device with internet connection and web browser, for example, smartphone, tablet, PC, smart TV. It also allows the sending of SMS messages to 1 or 2 mobile phones configured in the controller to warn of anomalies, irrigation starts or end of irrigation.
Second irrigation pump: Both pumps, controlled independently or simultaneously in each irrigation program
Diesel starter control: Controls the starting and stopping of a diesel engine or generator set.
Communication with external modules: Opening and closing valves, starting and stopping engines. In addition, the reading of remote analogue and digital sensors
Expansion of the number of fertilisers: Up to 8 fertilisers
12VDC/Latch 2-wire version: Power the controller with a 12VDC battery that can be recharged by a solar panel or manually.
2-Water mixture:Allows mixing of water with very high electrical conductivity with water of lower conductivity.
(NEW) Connection to METOS weather stations. Allows the controller to receive readings from a METOS weather station and to condition the start and end of irrigation schedules to those readings. The Maher App contract is required.

Hardware options:

Expansion of outlets. The controller comes with 16 outputs as standard and the number of outputs can be increased to a maximum of 96.
Expansion of analogue inputs. The controller has 6 analogue inputs as standard and the number of analogue inputs can be extended up to a maximum of 54.
Módem GPRS or Ethernet. The GPRS or Ethernet modem allows the controller to connect to the Maher App server.